Using The [Playback] Mode Menu; [2D/3D Settings]; [Slide Show] - Panasonic Lumix DMC-GF2 Operating Instructions Manual

Using the [PLAYBACK] Mode Menu

You can use various functions in playback mode to rotate pictures, set protection for them
etc.
•
With [TEXT STAMP], [RESIZE], [CROPPING] or [ASPECT CONV.], a new edited picture is
created. A new picture cannot be created if there is no free space on the card so we
recommend checking that there is free space and then editing the picture.
Playback methods for the 3D pictures can be switched.
•
This is a menu that is only displayed when 3D display is possible. Refer to
You can play back the pictures you have taken in synchronisation with music, and you can
do this in sequence while leaving a fixed interval between each of the pictures.
You can also put together a slide show composed of only still pictures, only motion
pictures, only 3D pictures, only pictures of a particular category, or only favourites.
We recommend this feature when you view your pictures by connecting the camera to a
TV.
1
Select [SLIDE SHOW] on the [PLAYBACK] Mode menu.
2
Press 3/4 to select the item and then press [MENU/SET].
•
[FAVORITE] can be selected only when [FAVORITE] on the
[PLAYBACK] Mode menu
pictures already set as favourites.
•
During [CATEGORY SELECTION], press
category, and then press [MENU/SET] to proceed to step
For details on categories, refer to P151.
•
Refer to P167
3
Press 3 to select [START] and then press [MENU/SET].
4
Press 4 to finish the slide show.
•
Normal Playback resumes after the slide show finishes.

[2D/3D SETTINGS]

[SLIDE SHOW]

(P160) is at [ON] and there are
for the method to playback [3D] pictures in 3D.
Playback/Editing
3/4/2/1 to select a
- 149 -
P167 for details.
(P56)
3
.