What Can Be Done By Touch Operation - Panasonic DMC-G2R Operating Instructions Manual

By using the touch panel, you can move the AF area by touching the subject to focus on,
or change the setting directly by touching the icons, making it easier to operate during
recording or setting.
Following are examples of what can be done by touch operation.
Touch Tracking (P49, 82)
Touch 1-area AF (P83)
Face Recognition Touch
1-area AF (P80)
Touch Multi AF Area
Selection (P83)
Touch MF Assist Enlarge
(P84)
Touch Quick Menu (P34)
LCD Recording Information Display Touch Operation (P35)
Note
•
When the guide as shown on the right is displayed on the screen,
it is also possible to operate using 3/4/2/1 of the cursor
button and [MENU/SET] button.
3/4/2/1: Selection of items or setting of values etc. is
performed.
[MENU/SET]: Confirmation of setting contents or exit from menu
is performed.
•
Menu item cannot be set with touch operation. Set with the cursor button or rear dial.
(P33)
•
Touch operation is not possible while using the viewfinder. Perform the setting using the
cursor button or rear dial (P18).

What can be done by touch operation

When recording
Touch Shutter (P55)
During recording, a picture is
taken automatically after
focusing on the subject that is
touched.
When recording
Guide Line Position
Movement (P66)
Histogram Position
Movement (P67)
When playing back
Picture Playback (P58)
Playback Zoom (P61)
VQT2S42
Before Use
17