Panasonic DMC-G2R Operating Instructions Manual page 144

Advanced (Recording pictures)
[LVF/LCD AUTO]
•
LCD monitor display and viewfinder display can be switched manually by pressing [LVF/LCD].
(P43)
[¦
BUTTON SWITCH]
[ BUTTON]
[ REC AREA]
•
The recording area indicated is a guide line.
[REMAINING DISP.]
[TOUCH Q.MENU]
144
VQT2S42
It will switch automatically to viewfinder display when an eye or
object gets near the viewfinder using an eye sensor. It will return
to LCD monitor display when it goes away.
[OFF]/[ON]
It is possible to set how the [¦] button to toggle to Intelligent
Auto Mode will operate.
:
[SINGLE PRESS]
It will switch to Intelligent Auto Mode by pressing [¦].
[PRESS AND HOLD]
It will switch to Intelligent Auto Mode by pressing [¦] for a while.
Enables/disables the motion picture button.
[OFF]/[ON]
This changes the angle of view during motion picture recording
and still picture recording.
[!] (Picture)/[
This will switch display between the number of recordable
pictures and available recording time.
[REMAINING SHOTS]:
This will display the number of recordable pictures for still
pictures.
[REMAINING TIME]:
This will display the available recording time for motion pictures.
Enables/disables the
[OFF]: Touch Quick Menu icon is not displayed on the screen,
and the Touch Quick Menu is disabled.
[ON]: Touch Quick Menu icon is displayed on the screen,
and the setting by the Touch Quick Menu is enabled
when touched the icon.
:
] (Motion picture)
Quick Menu during the touch operation
.