Panasonic DMC-G2R Operating Instructions Manual page 198

Others
The flash is not activated.
•
Is the flash closed?
> Slide the [
The flash is activated 2 times.
•
The flash is activated 2 times. The interval between the first and second flash is longer when
Red-eye Reduction (P69) is set so the subject should not move until the second flash is
activated.
The LCD monitor turns off although the camera is turned on.
•
The LCD monitor turns off when [AUTO LCD OFF] (P37) is selected for the [ECONOMY] mode.
[This does not happen when using the AC adaptor (P183).]
•
It will switch to viewfinder display if there is hand or object near the eye sensor. (P43)
The LCD monitor/Viewfinder is too bright or dark.
> Adjust the brightness of the LCD monitor/viewfinder to a proper level. (P36)
•
[POWER LCD] is activated. (P37)
It may flicker for an instant or the brightness of the screen may change significantly
for an instant.
•
This occurs due to the aperture of the lens changing when the shutter button is pressed
half-way, or when the brightness of the subject changes. This is not a malfunction.
The picture is not displayed on the LCD monitor.
•
Does the picture appear on the Viewfinder?
> Press [LVF/LCD] to switch to LCD monitor display. (P43)
•
Is the LCD monitor switched off?
> Switch the display by pressing [DISPLAY]. (P64)
LCD monitor and viewfinder do not switch when [LVF/LCD] is pressed.
•
Is the [EXPO. SETTINGS] set to [SWITCH BY PRESSING THE LVF/LCD BUTTON]? (P143)
•
It is only displayed on the LCD monitor when the camera is connected to a PC or printer.
Black, red, blue and green dots appear on the LCD monitor.
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
Noise appears on the LCD monitor.
•
In dark places, noise may appear to maintain the brightness of the LCD monitor.
198
VQT2S42
OPEN] lever to open the flash. (P67)
LCD monitor/Viewfinder
Flash