Panasonic DMC-G2R Operating Instructions Manual page 174

Connecting to other equipment
Using a drag-and-drop operation, move the pictures you want to
acquire or the folder storing those pictures to any different folder on
the PC.
•
Data from the PC can not be written to the camera using the USB connection cable.
∫ Disconnecting the USB connection cable safely
•
Proceed with the hardware removal using "Safely Remove Hardware" on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of
the digital camera before removing the hardware.
Note
•
Turn the camera off before connecting or disconnecting the AC adaptor (P183).
•
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
∫ Viewing the contents of the card using the PC (folder composition)
Folders and images processed in the PC cannot be played back on the camera. It is
recommended to use the "
CD-ROM (supplied) when you write the image from PC to a card.
A new folder is created when pictures are taken in the following situations.
•
After [NO.RESET] (P40) in the [SETUP] menu has been executed
•
When a card containing a folder with the same folder number has been inserted (Such as when
pictures were taken using another make of camera)
•
When there is a picture with file number 999 inside the folder
∫ Connection in the PTP Mode (Windows
Mac OS X only)
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
•
When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP
mode.
•
[AVCHD Lite] motion picture cannot be played back in PTP mode.
174
VQT2S42
PHOTOfunSTUDIO 5.0 HD Edition
1
2
3
4
MISC:
AVCHD:
R
" bundled software on the
Folder number
Colour space P: sRGB
_: AdobeRGB
File number
JPG: Pictures
MOV: [MOTION JPEG]
RW2: Pictures in RAW files
DPOF print
Favourite
[AVCHD Lite] Motion
pictures
XP, Windows Vista
R R
, Windows 7 and