Attaching the Lens Hood
In bright sunlight or backlight, the lens hood will minimise lens flare and ghosting. The lens
hood cuts off excess lighting and improves the picture quality.
•
Check that the camera is turned off.
•
Close the flash.
To attach the lens hood (flower shape) that came with the 14 – 42 mm/F3.5 –5.6 lens
included in DMC-G2K/DMC-G2W
Insert the lens hood into the lens
with the short sides at the top and
bottom, and turn in the direction
of the arrow until it stops.
A Fitting to the mark.
To attach the lens hood that came with
the 45 – 200 mm/F4.0 –5.6 lens included
in DMC-G2W
Insert the lens hood into the lens,
and turn in the direction of the
arrow until it stops.
B Fitting to the mark.
Preparation
23
VQT2S42