Mounting And Detaching A Lens - Canon EOS 1D MkII Instruction Manual

Mounting and Detaching a Lens

Mounting a Lens
Detaching the Lens
When attaching or detaching the lens, take care to prevent dust from
entering the camera through the lens mount.
Remove the caps.
1
¡Remove the rear lens cap and the
body cap by turning them as shown by
the arrow.
Attach the lens.
2
¡Align the red dots on the lens and
camera and turn the lens as shown by
the arrow until it snaps in place.
On the lens, set the focus mode
3
switch to <
¡If it is set to <
be possible.
Remove the front lens cap.
4
While pressing the lens release
button, turn the lens as shown by
the arrow.
¡Turn the lens until the red dot is at the
top, then detach the lens.
>.
f
g
>, autofocus will not
23