Table of Contents
Advertisement
Installing and Removing the Memory Card
The camera can use both a CF card and SD card. There must be at
least one card installed to enable shooting.
If both cards are installed, you can select which card to record the
images. (p.61)
If you use an SD card, be sure the write protect switch is set
upward to enable writing/erasing.
Installing the Card
24
Open the cover.
1
¡Flip up and turn the cover release
handle as shown by the arrow.
Insert the memory card into the
2
camera.
¡The left slot is for the CF card, and the
right slot is for the SD card.
¡Make sure the label side of the card is
on the left, then push in the card in the
direction of the <
Close the cover.
3
¡Push in the cover until the cover
release handle returns to its original
position.
> arrow.
q
Advertisement
Table of Contents
