Installing and Removing the Battery
Installing the Battery
If the battery's rubber lining (to repel water) is not clean, use
a moist cotton swab to wipe it clean.
Checking the Battery Level
4
When the <
> switch is set to <
indicated as follows:
20
Detach the battery compartment
1
cap.
¡Grasp both sides of the cap and pull it
off.
Insert the battery.
2
¡Insert the battery and while pushing it
in, turn the release handle as shown
by the arrow.
1
> (p.27), the battery level will be
z
: Battery level OK.
x
: Battery level is low.
b
: Battery will be exhausted soon.
n
: Battery must be recharged.
Rubber lining