Canon EOS 1D MkII Instruction Manual page 69

¡
To select a vertical AF point, you can also press the <
hold down the <
¡
If two AF points (
If you then select the left or right AF point, only that AF point will be
active.
Manual selection limited to 11 AF points
(p.151)
Manual selection limited to 9 AF points
With C.Fn-13-1/2/3, all 45 AF points will be available for automatic selection.
P
> button and turn the <
hh
) light up, both AF points will be used for autofocusing.
¡Since the selectable AF points are
limited to 11, you can better
concentrate on framing the subject.
¡The AF point selection procedure is the
same as explained in steps 1 and 2.
¡The center AF point and 8 peripheral
AF points are selectable.
¡Selecting a horizontal AF point is the
same as explained in steps 1 and 2.
Selecting an AF point beyond a
peripheral AF point will set the
automatic selection mode.
¡To select a peripheral AF point, press
the <
dial.
S
6
> dial.
C.Fn-13-1, 2
C.Fn-13-3
S
> button and turn the <
> button, then
(p.151)
5
>
69