Unpacking The Appliance - Baumatic AS6.2 Instruction Manual

MODEL 1
AS6.2SS 1.20kW – 140mm
B13 1.20kW – 140mm
B14SS 1.20kW – 140mm
BH14SS 1.20kW – 140mm
B15SS 1.20kW – 140mm
BF15SS 1.20kW – 140mm
B16SS 1.20kW – 140mm
BF16SS 1.10kW – 140mm
B45 0.70kW – 120mm
All the models covered in this manual have individual residual heat indicators.
Voltage 230 V ac 50Hz
Total electrical connected load AS6.2 – 6.6kW B13/B14 - 6.0 kW B15/BF15 – 6.4kW
B16/BF16 – 7.2kW B45 – 4.8kW
Supply connection must be via a switched double-pole isolator with 3mm contact
separation.
Mains supply connection cable: 3 x 2.5mm2 type H05 RR-F <HAR> marked

Unpacking the appliance.

When unpacking the appliance please check that the following items are contained within the
packaging:
1 Baumatic hob
1 Ceramic hob scraper
1 Installation / Instruction manual
1 Baumatic guarantee card
4 Fixing brackets
4 Fixing screws
4 Spring clips
1 Sealing strip
Before using your hob for the first time.
We recommend that before using your new appliance for the first time that you clean the hob surface
using hot soapy water (do not use any abrasive cleaners) this will remove any remnants that have
been left behind during the manufacturing process. Ensure that any labels and protective films are also
removed.
Check each cooking zone individually in turn, by turning each zone to the maximum setting, The first
time the appliance is switched on it may emit an odor this will only last for a short period and will
disappear with use.
Do not install this product if there are obvious signs of transportation damage, in such rare cases
please refer this to your supplier.
2 3
1.20kW – 140mm 0.70kW – 120mm
1.80kW – 180mm
1.80kW – 180mm
1.80kW – 180mm
1.80kW – 180mm 0.75kW - 120mm
1.80kW – 180mm 0.75kW – 120mm
1.10kW – 140mm 2.00kW – 250mm
1.80kW – 180mm 0.75kW – 120mm
1.70kW – 180mm 1.20kW – 140mm
4 5
1.70kW – 180mm 1.80kW – 180mm
2.20kW – 210mm
2.20kW – 210mm
0.75kW – 120mm 2.20kW – 210mm
2.20kW – 210mm 1.10kW – 140mm
6
2.00kW-240mm
6