Baumatic AS6.2 Instruction Manual page 11

The timer starts counting down as soon as the required time is set. The time remaining is
displayed on the timer display, the time maybe adjusted once set and will start the countdown again
from the new time setting. Once the timer reaches zero the selected cooking zone will switch off and an
audible signal is emitted and continues for 30 seconds.
Automatic Preheating Mode
The automatic preheat mode allows items being cooked to be brought quickly up to temperature and
then continue cooking at a selected heat setting. The automatic preheat mode enables the user to select
the preheat function and pre-select a required cooking heat level at the beginning of the cooking
process. Once selected the hob will automatically preheat at maximum power for a specific time, and
then revert to the preset power level and continue the cooking process until cancelled by the user.
Example:
1. Turn the hob on by touching the On / Off Key
2. Select the required cooking zone.
3. Select the Automatic preheat mode by pressing the
key once, select level 9. The automatic preheat mode is now set.
4.
To complete the setup sequence it is necessary to select the preset cooking power level for the
zone after the preheat period this is done by pressing the
required between 1 and 9. The heat display indicator will alternate between the
the cooking heat selection.
Once the preheat time limit has elapsed the cooking zone indicator stops alternating between
and the power level and the preset power level only.
Preheat Time Limits
Power Level
1
2
3
4
5
6
7
8
9
Changing the cooking power level during the automatic preheat
During the preheat cycle the power level maybe changed by the user after it has been running for a
period of at least 3 mins, this is done by first selecting the zone in use and then using the
changing the power level to a new setting, when any such change takes place the time for the preheat
cycle will be automatically recalculated taking into consideration the length of time elapsed from the
previous setting.
Canceling the Automatic Preheat Mode
To cancel this program once is has been set and the alternating
select the appropriate zone by pressing the key pad then press the
10 seconds a series of audible bleeps will be heard to signal that the program has been cancelled and
A
the symbol will be extinguished.
Normal operation of the zone can now be resumed.
Time Limit
1 min
3min
4 min 48sec
6 min 30 sec
8 min 30 sec
2 min 30 sec
3 min 30 sec
4 min 30 sec
-----------
–
key once, select level 9 and then the
–
key set the cooking heat level
A
is visible in the display window,
–
key for 10 seconds at the end of the
+
A
symbol and
A
symbol
+ –
or
10