System Example - Alpine DVA-9860R Owner's Manual

System Example

Connect the Ai-NET compatible digital audio processor (Fiber digital compatible) and touch panel compatible monitor/
changer
System switch EQ/ DIV
DVA-9860R
• When the fiber digital compatible product is connected, it is
necessary to set the mode of this unit. Refer to "Setting the Digital
Output" (page 24) and set to ON. Then refer to "Setting the Digital
Audio Processor" (page 24) and switch the setting.
* When connecting with PXA-H510:
• Connect the fiber digital input terminal to the DVD.
• DVA-9860R and DVA-5205P cannot be connected
simultaneously when fiber digital is in use.
Please observe the following when using Fiber Optic Cable.
• Be careful not to bend the Fiber Optic Cable at a sharp angle.
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
Video output Lead
(Yellow)
RCA Extension cable (video)
Remote control output Lead
Remote control input Lead
(White/Brown)
Monitor control Lead
(White/Pink)
To Digital output terminal
Fiber optic Cable
Ai-NET Cable
Touch panel
Video input terminal
compatible
monitor box
(sold separately)
(White/Brown)
Monitor control Lead
(White/Pink)
Ai-NET compatible
Fiber digital input terminal
digital audio processor
(for head unit)*
(sold separately)
(Fiber digital
compatible)
Ai-NET output terminal
Touch panel
compatible monitor
(sold separately)
Ai-NET Cable
Fiber digital
input terminal
(for changer)
**
Fiber optic
cable
Ai-NET compatible CD
changer (sold separately)
** Only connect fiber
digital compatible
CD changer
59
-EN