Switching The Angle (Dvd Only); Switching The Subtitles (Subtitle Language) (Dvd Only); Displaying The Disc Status (Dvd Only); Displaying The Disc Status (Video Cd Only) - Alpine DVA-9860R Owner's Manual

Switching the Angle (DVD only)

On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
• This operation is controlled using the remote control unit.
During playback, press ANGLE.
The angle switches between the angles recorded on the disc
each time the button is pressed.
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
Switching the Subtitles (subtitle language)
(DVD only)
With multiple subtitle language DVDs, the subtitle language can be
switched during playback, or subtitles can be hidden.
• This operation is controlled using the remote control unit.
During playback, press SUBTITLE.
The subtitle switches between the languages recorded on the
disc and OFF each time the button is pressed.
• There may be a delay before the selected subtitle appears.
• Not all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVD's menu.
• The selected subtitle language becomes the default setting every
time the power is turned on or the disc is replaced. If a disc does
not include that language, the disc's default language is selected
instead. Refer to "Setting the language" (page 25).
• For some discs, the subtitles will be displayed even when this is set
to off.
Tips
Switching from the disc menu.
For some discs, the audio language, angle and subtitles can be
switched from the disc menu.
1 Press MENU, select the item, then press ENT.
2 Press 8, 9, ; or : to select the language or angle,
then press ENT.
(For some discs, they can be selected using the
number keys "0" to "9" while the language or the angle
menu is displayed.)
18
-EN

Displaying the Disc Status (DVD only)

Use the procedure described below to display the status (title number,
chapter number, etc.) of the currently playing DVD on the monitor
screen.
• This operation is controlled using the remote control unit.
During playback, press DISP/TOP M.
The playback status is displayed.
The playback status display closes when DISP/TOP M. is
pressed again.
Current chapter
Playback disc
number
Current title
DVD – V I DEO N T SC
number
1 1 8
Playback status
P L A Y
Repeat setting
R E P E A T O F F
(Default setting -
A U D I O : E N G
REPEAT OFF)
D O L B Y
S U B T . : J P N
Current audio
A N G L E : 1 / 3
language/number
Current subtitle
Current angle
language/number
number

Displaying the Disc Status (Video CD only)

Use the procedure described below to obtain an on-screen display of
the status (track number, etc.) of the currently playing video CD on
the monitor screen.
• This operation is controlled using the remote control unit.
During playback, press DISP/TOP M.
The playback status is displayed.
The playback status display closes when DISP/TOP M. is
pressed again.
Playback disc
Current track V I DEO – CD
number
1
Playback status
Repeat setting
P L A Y
R E P E A T
(Default setting -
P B C O F F
REPEAT DISC)
Playback control
(PBC)
• When PBC is set to ON, the current track number and track
playback time is not displayed.
TV system
(NTSC or PAL)
Chapter
playback time
1 : 2 3 ' 4 5 "
1 / 4
Current audio
D 3 / 2 . 1
signal output
1 / 2
TV system
(NTSC or PAL)
N T SC
Track playback
time
1 2 ' 3 4 "
D I S C