Searching Directly By Chapter Or Track Number; Quick Search; Chapter/Track/Title Repeat Playback; Switching The Audio Tracks - Alpine DVA-9860R Owner's Manual

Searching Directly by Chapter or Track
Number
Use this function to easily move to the beginning of the chapters or
tracks on the disc.
• This operation is controlled using the remote control unit.
1
During playback or pre-stop, input the chapter or
track number you desire using the number keys
("0" to "9").
2
Press ENT.
Playback starts from the selected chapter or track.
• This function cannot be used on discs on which no chapter
numbers are recorded.
• The beginning of a track number cannot be directly found on the
Video CD equipped with PBC (playback control). Set VCD PLAY
MODE to turn the PBC function off. Refer to "Setting the Video
CD Play Mode" (page 28).
• Depending on the number of digits input, playback may start
automatically even if ENT. is not pressed in step 2.
• Press CLR to delete the last digit in the chapter/track number.
Press and hold CLR for at least 2 seconds to clear "Chapter" and
"Track" numbers.
• Press RETURN to cancel the chapter/track search mode and
resume normal playback.

Quick Search

You can search for chapters (tracks).
1
Press and hold SEARCH/Q.S.
for at least 2 seconds in the DVD/Video CD mode to
activate Quick Search mode.
2
Turn the Rotary encoder on the main unit within
10 seconds to select a desired chapter (track).
The selected track is played back immediately.
• Quick Search mode is cancelled by pressing and holding
SEARCH/Q.S. for at least 2 seconds.
• The quick search mode cannot be used on video CDs with playback
control (PBC). Set VCD PLAY MODE to turn the PBC function off.
Refer to "Setting the Video CD Play MODE" (page 28) .

Chapter/Track/Title Repeat Playback

Use this function to play the disc's titles, chapters or tracks
repeatedly.
During playback, press 4 (
The repeat mode switches each time the button is pressed.
DVD
REPEAT CHAPTER
• By pressing 4 (
to REPEAT OFF.
VIDEO CD
* Displayed only in the changer mode.
• The track/disc repeat modes cannot be used on video CDs with
on the main unit
playback control (PBC). Set VCD PLAY MODE to turn the PBC
function off. Refer to "Setting the Video CD Play Mode" (page 28).
• For some discs it is not possible to switch the repeat mode.

Switching the Audio Tracks

DVDs can have up to 8 different audio tracks. These alternate tracks
can be switched during playback.
• This operation is controlled using the remote control unit.
During playback, press AUDIO.
The sound switches between the alternate audio tracks
recorded on the disc each time the button is pressed.
• The selected audio track becomes the default setting every time the
power is turned on or the disc is replaced. If a disc does not
include the language you selected for the default audio track, the
disc's default language is selected instead. Refer to "Setting the
language" (page 25).
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.
Video CDs with multiplex audio
During playback, press AUDIO.
The left and right channels will be output as shown in the figure
below, each time the button is pressed.
↓
The chapter is played repeatedly.
↓
The title is played repeatedly.
REPEAT TITLE
↓
The mode returns to normal
REPEAT OFF
playback. (Factory default)
) for more than 2 seconds, the unit will switch
↓
The track is played repeatedly.
REPEAT TRACK
↓
The entire disc is played repeatedly
DISC
REPEAT
(Factory default)
↓
*
Playback does not repeat.
REPEAT OFF
LR → LL → RR → LR
) on the main unit.
17
-EN