The navigation system measures the distance with the speedometer pulses. Since
the speedometer pulses depend on the vehicle manufacturer and the tyre size,
when you buy a new vehicle or replace your tyres, the speedometer pulses are
compared with the distance measured with GPS waves and the distance coefficient
is automatically recalibrated.
You can check on the screen whether or not speedometer pulses are being
counted.
1
Press the MENU button to display the main menu.
Select "Set-up" from the main menu, then select
"CALIBRATION" and press ENTER.
2
A sub-menu is displayed. Select "COEFFICIENT" and
press ENTER.
3
Select "CLEAR LEARNING" and press ENTER.
4
Confirmation screen asking you whether you wish to
execute the clearance procedure or not. Select "Yes" if
you wish to clear.
Distance coefficient
ENTER
ENTER
ENTER
If you select this function after
replacing your tyres, the time
required for the correction can
be shortened.
The calibration level is
displayed with a bar
graph form.
The cumulative
speedometer pulse count
is displayed.
61