Table of Contents
Advertisement
Before Using The System
Switching the display on/off
With the Alipine navigation system, when the ignition key is turned to ACC or
ON and the display monitor is set in the navigation display mode or external
input display mode, the opening screen will be automatically displayed.
For operation of remote control, see page 66 and the Owner's Manual for your
system.
After the opening screen is
1-1
displayed, important information
saying "Please be sure to read this!"
is displayed. Be sure to read it.
1-2
If the language has not been selected
yet, the guide language selection
menu is displayed. Select (highlight)
the desired guide language by tilting
the joystick. Then press the ENTER
button. (For details, see the "Setting
language mode" section.)
After you have read this important
2
information, press the ENTER button.
The map screen is displayed.
With the map displayed, press the OFF
3
button to turn off the display monitor.
If you press the ON button, the opening screen is
displayed.
Tips
12
ENTER
ENTER
OFF
a If there is no disc in the navigation system, "Please insert map CD ROM" is
displayed. For details on how to load the disc, refer to the "Inserting a disc" and
"Removing a disc" sections on the manual for the navigation system.
a If the disc cannot be read, the "CD ROM unreadable. Please check CD ROM"
message is displayed. Load the correct disc.
a If for an extended period of time the monitor is kept on with the engine off, the
battery may discharge.
Advertisement
Table of Contents
