Before Using The System; Writing The System Programme Installed - Alpine HVS-HF01 SMART MAP PRO Owner's Manual

Before Using The System

Writing the system programme installed

If a different version of the map disc has been used with your navigation system, the system programme
installed will be rewritten automatically to read this SMART MAP PRO disc.
1
Remove the different version of the map
disc from your navigation system. Insert
this SMART MAP PRO disc. (For
removing and inserting procedure, refer
to the Owner's Manual of the system.)
The display shows "Set Original CD-ROM" while the disc
is being loaded, then it shows "Program CD-ROM is
being loaded." and the system rewrites the programme.
2
The opening screen appears in the
display.
For the procedure after this, see "Before Using The
System" on page 12.
Note: If a different version of the map disc is inserted after
the system programme has been rewritten, the
selection menu appears in the display.
Select the desired menu item by tilting the joystick
and pressing the ENTER button on the remote
control. The opening screen appears on the
display.
10
Before Using The System