Step 2: Check The Dial Tone - Lexmark Genesis S815 Quick Reference Manual

Connect the printer to any of the N ports.
To connect:
1
Connect one end of a telephone cable to the
2
Connect the other end of the cable to the RJ-11 adapter, and then connect the adapter to an N port.
3
If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as
shown.

Step 2: Check the dial tone

A dial tone lets you know if the telephone line is working or if the printer is properly connected to the telephone line.
Make sure the telephone line and the wall jack are working
1
Plug an analog telephone into the wall jack.
2
Listen for a dial tone through the telephone handset.
If you hear a dial tone, then the telephone line and the wall jack are working.
Make sure the printer is properly connected to the telephone line
1
While the printer is connected to a telephone line through the
telephone into the
2
Listen for a dial tone.
If you hear a dial tone, then the printer is properly connected to the telephone line.
port of the printer.
Setting up the printer to fax
N F N
port of the printer.
port on the back of the printer, plug an analog
41
PHONE LINE