Resetting The Pcmcia Card; Printing A Print Server Configuration Page - HP wp110 - 802.11b Wireless Print Server Setup Manual

resetting the PCMCIA card

The print server contains a Type II
PCMCIA card. To reset the card:
1. Unplug the power cord from the print
server.
2. Remove the front cover of the print
server.
3. Verify that the PCMCIA card is firmly
inserted into the connector.
4. Plug the power cord into the print
server.
5. Observe the lights and verify the
initialization cycle is normal:
a. All three lights turn on.
b. All three lights turn off.
c. The Power light turns on.
6. Replace the front cover.
7. After the print server completes its
initialization cycle, print a Print Server
Configuration Page.
printing a print server
configuration page
Printing a Print Server Configuration
Page verifies that the print server and
printer are communicating properly (see
page 4 for printing instructions). If the
Print Server Configuration Page does not
print:
1. Verify the following:
– power and parallel cables are
firmly connected
– printer is turned on
– PCMCIA card is securely installed
2. Print a Print Server Configuration
Page.
3. If a Print Server Configuration Page
does not print, see "contacting hp
customer care" on page 11.
9