Hayward Aqua Plus® Installation Manual page 32

if AQL-SS-6B is connected
6B Spa Config.
+ to view/change
Select 6B Spa
A
6B A, Button 1
Pool/Spa
Select 6B Spa
This menu only appears if more than one AQL-SS-6B is detected at power up. Select which of the available
remote controls (A, B or C) is to be configured.
6B A, Button 1
This menu allows the user to map each button of the AQL-SS-6B to one of the standard Aqua Plus
functions. The default selections are: Button 1 - Pool/Spa, Button 2 - Filter, Button 3 - Lights, Button 4 -
Heater1, Button 5 - Aux1 and Button 6 - Aux2.
Remote Menus
Enabled
This feature will prevent unauthorized access to the Settings, Timers, and Configuration menus from any
of the Aqua Plus's remote display/keypads. When disabled, the remote display/keypads will only show
the default menu and allow on/off control via the pushbuttons. Note that the function of the Aqua Plus's
built-in display/keypad is unchanged by this selection. Once disabled, the only way to enable "Remote
Menus" is to use the local display/keypad.
All Timeclocks
7-day
This selection affects ALL of the timeclock logic in the Aqua Plus. If "7-day" is selected, each timeclock
will have one set of turn-on/turn-off settings that operate every day of the week. If "Weekend/Weekdays"
option is selected then the user can enter one set of turn-on/turn-off times for the weekend (fixed as
Saturday/Sunday) and another set of turn-on/turn-off times for weekdays (Monday through Friday).
Time Format
12 hour AM/PM
Units
ºF and PPM
if any output is configured as a
variable speed pump
VSP Speed
%
This is the unit of measure for displaying the speed of the variable speed pump. Select % of maximum
speed (3450 RPM) or revolutions per minute (RPM).
Push to access the 6 Button Spa Side Remote options
Move to previous/next configuration menu
Rotates between all available remotes
Move to next menu item
Rotates between System Off, Pool/Spa, Filter, Lights, Heater1,
Aux1 and Aux2
Move to previous/next menu item or next configuration menu
Toggle between Enabled (default) and Disabled Remote Menus
Move to previous/next configuration menu
Toggle between 7-day (default) and Weekend/Weekday time options
Move to previous/next configuration menu
Toggle between 12 hour AM/PM (default) and 24 hour time format options
Move to previous/next configuration menu
Toggle between ºF and PPM (default) and ºC and g/L (Metric) options
Move to previous/next configuration menu
Toggle between % and RPM
Move to previous/next configuration menu
29