LaCie 301160U - 1TB Ethernet Disk RAID Network Attached Storage User Manual page 79

LaCie Ethernet Disk RAID
User Manual
13. To complete the installation and restart your com-
puter, click Finish.
If you do not want to restart your computer at this
time, select No, I will restart my computer later
then click Finish. When the confirmation message
appears, click OK. You do not have to restart the
computer immediately after installation, but you do
have to restart it before running Windows Backup
Software.
ImpOrTANT INfO:
computer and you subsequently reinstall Windows
Backup Software, serious problems can occur with
your installation. It is strongly recommended that
you restart your computer at your earliest conve-
nience.
14. After you restart your computer, click
welcome message. The
pears. See Fig. 7.1.4.G.
15. Enter the key code for licensing the product and
click OK. The license key code is located on the back
of the Ethernet Disk RAID. If you have an Inter-
net connection, the license is activated automatically.
When you click
the Protect a Disk
about this wizard, refer to section
Your Disks.
If your Internet connection is temporarily down, or
if this computer doesn't have an Internet connection,
click OK on the warning message. The
wizard still starts, but after 30 days you will no longer be
able to perform backups or recovery until you activate
the license. For more information, refer to section
Activating Your License.
If you do not restart your
OK
Add License dialog box ap-
OK on the confirmation message,
wizard starts. For information
7.2. Protecting
Protect a Disk
and
Fig. 7.1.4.F
on the
Fig. 7.1.4.G
ImpOrTANT INfO:
this key code on a different computer, an error
message appears, and you must re-activate your li-
cense. For more information, refer to section
Activating Your
7.1.6.
Protecting Local Disks
page 
If you previously used
7.1.6.
License.