LaCie 301160U - 1TB Ethernet Disk RAID Network Attached Storage User Manual page 21

LaCie Ethernet Disk RAID
User Manual
When you click Next, the
page appears (Fig. 4.4.F.).
8. To accept how the disk space will be proportioned
for shared folders and backups (only 200 MB will be
allocated for shared folders), click Finish.
If you want to allocate more space for shared folders,
select Allocate more space for shared folders
then specify how much space to allocate (either
available disk space
select Specified disk
gabytes to allocate for shared folders (the minimum
is 1 GB). Then click Finish.
9. On the confirmation message, click OK. The
figuration page appears (see Fig. 4.4.G.) and the sys-
tem is configured according to the settings you speci-
fied. Once the configuration is complete, the system
restarts.
10. After the Ethernet Disk RAID restarts, you can ac-
cess the Manager, add users, and create shared fold-
ers.
For more information, refer to section
the Manager, section
ager, section 5.4.1. Adding
Creating Shared
Disk Space Distribution
or Specified disk space). If you
space, enter the number of gi-
5.1. Accessing
5.2. Logging In to the Man-
Users, and section
Folders.
Configuring Your Ethernet Disk RAID
and
All
Fig. 4.4.F.
Con-
Fig. 4.4.G.
ImpOrTANT INfO:
amount of disk space allocated for shared folders
5.5.1.
later (as long as free disk space is available), but
you cannot reduce it without re-configuring your
disks and losing all your data. If you plan to back
up computer disks to your Ethernet Disk RAID,
it is recommended that you use the minimum
amount of space for shared folders, back up all the
computer disks that you plan to protect, and then
expand the space allocated for shared folders. This
ensures that adequate space is available for back-
ups.
page 
You can expand the