LaCie 301160U - 1TB Ethernet Disk RAID Network Attached Storage User Manual page 101

LaCie Ethernet Disk RAID
User Manual
7. If any backup views are open (including backup views
of disks other than the one you are recovering), click
Yes to close them.
The disk or partition is recovered to exactly its state
at the date and time of the selected backup.
To let you monitor the progress of this activity, the
Status page appears automatically. The
activity area displays the percentage of the recov-
ery that has completed,and the speed at which the
data is being sent over the network. The
bar graphically indicates how much of the recovery
is complete.
8. When you are prompted to restart the computer,
click OK.
You do not have to restart your computer immedi-
ately, but you cannot access the recovered disk or
partition until you do.
As soon as you restart the computer, you must start
Windows Backup Software and back up the recov-
ered disk or partition manually (as described in sec-
tion 7.3. Manually Backing Up Your
protection. In addition, if you recovered a partition
and any other partitions on the same disk were pro-
tected, you must manually back up those partitions
as well.
Current
Progress
Disk) to resume
Protecting Local Disks
TeChNICAl NOTe: You can cancel this op-
eration at any time by clicking
tivity. However, this will leave the local disk or
partition in an incomplete state, and you will have
to recover it again before you can use it.
page 0
Stop Current Ac-