LaCie 301160U - 1TB Ethernet Disk RAID Network Attached Storage User Manual page 55

LaCie Ethernet Disk RAID
User Manual
Network Settings Options
■
To change this
The packet size for transferring
data
The FTP settings
4. Click Apply.
5. When the confirmation message appears, click OK.
Managing Your Ethernet Disk RAID
Do this
Specify whether or not to transfer larger data packets between the
Ethernet Disk RAID and the computers in your network by selecting
or clearing the Jumbo Frames
Ethernet Disk RAID will use 1514-byte packets.
If you select this option, you can specify a larger packet size (from 1514
to 9014 bytes).
Using jumbo frames allows you to transfer data
TeChNICAl NOTe:
more quickly. However, you can select this option only if your network,
Ethernet switch, and the network interface cards (NICs) on the com-
puters in your network support the specified packet size. To determine
whether you can use jumbo frames, refer to the documentation for
those components.
If you want to use the Ethernet Disk RAID as an FTP server, select
the Enable FTP server check box. If you do not want to use it as an
FTP server, clear this option.
For information about accessing the Ethernet Disk RAID using FTP,
refer to section 5.2. Accessing Shared Folders Using
TeChNICAl NOTe:
dress of the Ethernet Disk RAID, you must now
access the Manager using the new IP address.
check box. If you clear this option, the
FTP.
If you changed the IP ad-
page