Table of Contents
Advertisement
Administrator System Settings
Basic > Advanced >
Admin
> Status > Shortcuts > Help
Passwords
Settings
Backup
Other
Passwords
Passwords are not required, but you may want to use them to prevent unauthorized tampering with sys-
tem settings if others have access to your network. You can designate an Administrator (who can change
all router settings, including the passwords) and Users (who can view settings, but cannot change them).
NOTE: If you create an Admin
Password, you may be asked to enter
your User Name (Admin) and re-enter
your password. To log in, you must
enter Admin in the User Name field.
You must always log in as Admin
before reviewing or changing any router
settings.
Administrator settings
• Enter passwords for Administrator and User. Confirm by re-entering them in the fields below.
Remote Management (Default Off)
If turned on, this feature allows you to change router settings from a remote location (i.e., via the
Internet). A username and password is required for access to the browser-based management interface.
• IP Address: Enter the Internet IP address of a computer that has access to the router. You can use a
wildcard asterisk (*) to allow all Internet IP addresses access to your network.
• Port: Enter the port number used for access to the router.
Example: http://x.x.x.x:8080
(Where x.x.x.x is the WAN IP address of the router and 8080 is the port used for the web management
interface.)
AT&T Plug&Share
22 Mbps Turbo Wireless Router 6800B4X
™
NOTE: Write down
your passwords
and store them in a
secure place. If you
forget the Admin
password, you will
not have access to
any settings until
you reset the router
to factory default
settings.
34
Advertisement
Table of Contents
