Routing - AT&T Plug&Share 6800B4X User Manual

Advanced System Settings
Basic > Advanced > Admin > Status > Shortcuts > Help
Virtual Server
Multi-Mode Applications
Filters
Firewall
DMZ

Routing

Performance
Routing
Options on this page should be changed only if necessary to manage very complex setups, such as a
network that is subdivided into several sub-networks. These options can control how your router manages
information between the subnetworks. Unless you are very skilled at network administration, do not
change the default settings.
Static routing
Enter information at this screen to add a static (permanent) route to a subnetwork.
• Network Address: Enter the static IP address of the subnetwork. Your ISP or network administrator
may provide you with this information.
• Network Mask: Enter the network (or subnetwork) mask for your network. If you leave this field blank,
the network mask defaults to 255.255.255.0.
• Gateway Address: Enter the gateway address for your network. Your ISP or network administrator
may provide you with this information.
• Interface: Select the interface you use to connect to the subnetwork (LAN, if local area network, or
WAN, if wide area network).
• Metric: Enter the metric you want to apply to this route.
AT&T Plug&Share 22 Mbps Turbo Wireless Router 6800B4X
™
30