Speed Dial Locations; Assign Or Reassign A Directory Entry To A Speed Dial Location; Clear A Speed Dial Location - AT&T EL52201 User Manual

Directory

Speed dial locations

The telephone base has 10 speed dial locations (0-9). Speed dial assignments
can only be selected from existing directory entries.

Assign or reassign a directory entry to a speed dial location

1. Press mENu/
2. Press or
CID
/sELECT.
mENu
3. Press or
CID
/sELECT.
mENu
4. To assign a speed dial location, press
scroll to an empty speed dial location.
-Or-
To reassign a speed dial location, press
scroll to the desired speed dial location.
/sELECT to show the directory.
5. Press
mENu
6. Press or
CID
find the desired entry.
-Or-
Use the alphabetical search to find the desired entry.
Refer to Steps 2 and 3 in search by name on page 29.
7. Press /sELECT to save. The name (up to 12
mENu
characters) of the desired directory entry appears in the
selected speed dial location.
notes:
• If the directory is empty, when you press
DIrECTOry EmpTy.
• If the speed dial location you select is occupied, the new directory entry you selected
replaces the old one. Take caution not to replace entries you do not wish to delete from the
speed dial locations.

Clear a speed dial location

1. Follow Steps 1-3 in Assign or reassign a directory
entry to a speed dial location above to enter the speed
dial list.
2. Press or
CID
/DELETE to clear the selected speed dial
3. Press
muTE
location. <EmpTy> appears in that speed dial location
and a confirmation tone sounds.
note: Clearing the speed dial locations does not affect the entries in
the directory.
in idle mode.
sELECT
to scroll to >DIrECTOry. Press
DIr
to scroll to >spEED DIAL. Press
DIr
to browse through the directory and
DIr
to scroll to a speed dial location.
DIr
or
CID DIr
or
CID
/sELECT in Step 5, the screen shows
mENu
31
>SPEED DIAL
REVIEW
to
>0: <EMPTY>
1: Robert Brown
to
DIr
Charlie Johnson
888-883-2445
>0: Charlie Joh...
1: Robert Brown
>0: Charlie Joh...
1: Robert Brown
>0: <EMPTY)
1: Robert Brown