Telephone Base Indicator Lights; Handset Alert Tones; Telephone Base Alert Tones - AT&T EL52201 User Manual

Appendix
Screen icons, indicator lights and alert tones

Telephone base indicator lights

Handset alert tones

One short beep
(Key tone or playback
confirmation tone)
One long beep
(Recording or playback
confirmation tone)
Two short beeps
(Error tone)
Three short beeps
(Out-of-range or no-power-at-
base warning tone)
Three short high-pitched beeps
(Confirmation tone)
Four short beeps
(Low-battery warning tone)

Telephone base alert tones

One short beep
(Playback confirmation tone)
Beeps every 10 seconds
(Message alert tone)
One long beep
(Recording or playback
confirmation tone)
/
ANs. ON/OFF light
On when the built-in answering system is on.
IN usE light
On when the handset is in use, when the answering system is
answering an incoming call or when the answering system is
being accessed remotely.
Flashes slowly when another telephone on the same line is in use.
Flashes quickly when there is an incoming call.
A key is pressed.
Plays at the end of each message.
Beginning or end of recording.
Plays at the end of all messages.
The command has failed.
You have reached the beginning or end of the list.
You have reached the minimum or maximum listening volume.
The handset is out of range or there is no power at the
telephone base.
The telephone has completed the command successfully.
Low battery warning.
Plays at the end of each message.
Message alert tone is on and there are new messages.
Call screening is on and the answering system is about to
record a message.
Plays at the end of all messages.
55