Speed Dial Locations; To Assign Or Reassign A Directory Entry To A Speed Dial Location; To Clear A Speed Dial Location - AT&T EL52200 User Manual

Directory

Speed dial locations

To assign or reassign a directory entry to a speed dial location

1. Press mEnU/
2. Press or
DIR
/SELECT.
mEnU
3. Press or
DIR
/SELECT.
mEnU
4. To assign a speed dial location, press
scroll to an empty speed dial location.
-oR-
To reassign a speed dial location, press
scroll to the desired speed dial location.
5. Press /SELECT to show the directory.
mEnU
6. Press or
DIR
find the desired entry.
-oR-
Use the alphabetical search to find the desired entry.
Refer to Steps 2 and 3 in To search by name on page 29.
7. Press /SELECT to confirm. The name (up to 12
mEnU
characters) of the desired directory entry appears in the
selected speed dial location.
notes:
• If the directory is empty, when you press
DIRECToRy EmPTy.
• If the speed dial location you selected is occupied, the new directory entry you selected
replaces the old one. Take caution not to replace entries you do not wish to delete from the
speed dial locations.

To clear a speed dial location

1. Follow Steps 1 through 3 in To assign or reassign a
directory entry to a speed dial location on this page to
enter the speed dial list.
2. Press or
DIR
/DELETE to clear the selected speed dial
3. Press
mUTE
location. <EmPTy> appears in that speed dial location.
note: Clearing the speed dial locations does not affect the entries in
the directory.
in idle mode.
SELECT
to scroll to >DIRECToRy, then press
CID
to scroll to >SPEED DIAL, then press
CID
to browse through the directory and
CID
to scroll to a speed dial location.
CID
or
DIR CID
or
DIR
/SELECT in Step 5, the screen shows
mEnU
31
>SPEED DIAL
REVIEW
>0: <EMPTY>
to
1: Robert Brown
to
CID
Charlie Johnson
888-883-2445
>
0:Charlie Johnson
1: Robert Brown
>
0:Charlie Johnson
1: Robert Brown
>0: <EMPTY>
1: Robert Brown