Handset Locator - AT&T EL52201 User Manual

Telephone operation

Handset locator

You can use the handset locator feature to find misplaced handsets.
To start the paging tone:
• Press /HANDsET LOCATOr on the telephone
base to start the paging tone on all handsets for
60 seconds.
To stop the paging tone:
pHONE/
• Press
dialing key (0-9,
-Or-
/HANDsET LOCATOr on the
• Press
telephone base.
-Or-
• Put the handset in the telephone base or charger.
notes:
• If you press
the ringer of that handset is silenced but the paging tone
continues on the other handsets.
• If a handset is accessing the answering system, on a call
(intercom call or outside call), or out of range, that handset does not beep when paged.
• You cannot use the handset locator feature while the telephone base is playing messages or
the answering system is being accessed remotely.
/spEAKEr, or any
,
FLAsH
or #) on the handset(s).
OFF/ muTE/
CANCEL or
on a handset,
DELETE
23