General Settings - Arturia MOOG MODULAR V 2.6 User’s User Manual

7.4.2

General settings

Course Bend (tune)
Mono
Legato
Course Bend (filter)
Course Bend (accord)
MonoPoly
Legato
Re Trigger
Nbr Release
Poly
The Moog Modular V responds to the pitch bend depending on the position of the "tune"
selector. This selector sets the amplitude of this response to +/- four octaves per semi-tone.
The knob close at hand noted "filter", allows the setting of the excursion of the response to the
tuning wheel for the filter cut-off frequency,
The "MonoPoly" interrupter takes the synthesizer from monophonic to polyphonic mode. The
Unison position allows us to play the indicated number of voices in parallel, while the playing
mode remains monophonic.
In the monophonic mode, 2 interrupters allow the control of the triggering of the envelopes.
The first, "re trigger" allows the reactivation of the trigger signal in the case where the notes
are linked. The second, "legato" allows the affectation of frequency smoothing (portamento)
whether the notes are linked or not.
The rotating "Volume" button sets the general volume of the Moog Modular V, while the
rotating "tune" button allows us to set the tuning with amplitude of 1 tone.
98
General settings
Filter coarse for the pitch bend wheel
Oscillator tuning coarse for the pitch bend wheel. (by semitone
from 0 to 4 octaves)
Selects synthesizer mode: ( Monophonic, Unison or polyphonic )
Selects legato mode (the portamento is active when the notes are
detached).
Selects the re trigger mode (the keyboard generates a trigger
when the notes are linked)
Select the number of release notes
Gives the number of polyphonic tracks (16-32-64)
ARTURIA – MOOG MODULAR V 2.6 – USER'S MANUAL
Course Bend (filter)
Poly
Re Trigger