Sequence #3 - Arturia MOOG MODULAR V 2.6 User’s User Manual

Table of Contents

9.2.3

Sequence #3

Reuse again the melodic sequence #1 and complete it by adding another type of modulation.

For example, make a variation on the opening frequency of filter1 ("frequency"), which will be

managed by the second line of knobs. Then the third line on a second VCO and finally the

fourth on the opening frequency of filter2.

Connect the square of the fourth oscillator (in order to create a second melodic sequence,

different from the first) to the audio input of filter2 and choose the "Low Pass Filter" type

for this filter.

Place filter 1 on the "S2" output of the sequencer: click several times in the small display at

the bottom of the module to show its characters.

Place the second "driver" on the "S3" sequencer output.

ARTURIA – MOOG MODULAR V 2.6 – USER'S MANUAL

Sequence 2 complete

Filter1 on the "S2" sequencer output

125

Table of Contents

Do you have a question about the MOOG MODULAR V 2.6 User’s and is the answer not in the manual?