Arturia MOOG MODULAR V 2.6 User’s User Manual page 58

"Save Config As" saves current configuration to a new one
"Delete Current Config" removes current configuration from list
The second section contains the list of existing configurations
The checked one is the currently selected MIDI map
Click on a configuration to load it
6.3.5.2 Assigning MIDI controls
In order to start assigning MIDI controls, click the "Midi Learn" button (left part). The button
remains highlighted to indicate that the "learn mode" is ON.
Click on a controller of the GUI to open the MIDI assignment popup.
Assigned
or not
Control
number
Learn assignment
The fastest and easiest way to assign a control is to move the fader, knob or button for it to be
recognized by Moog Modular V.
Manual assignment
It is also possible to change the assigned MIDI control number by clicking on Control#xx and
select another value.
Support for NRPN
In addition to MIDI Control Change messages, NRPNs are supported: either send NRPN MIDI
control messages to Moog Modular V, or check NRPN, then select LSB# and MSB# numbers:
Remove assignment
Assignments can be removed by clicking the "Clear" button. The message "Unassigned" will
then be displayed.
Continue selecting the parameters you want to map to create a complete configuration.
58
MIDI assignation popup
MIDI assignation popup, NRPN activated
ARTURIA – MOOG MODULAR V 2.6 – USER'S MANUAL
Plug-in parameter
name