Installation Instructions - Allstar MH5011S Installation And Owner's Manual

INSTALLATION INSTRUCTIONS

MOTOR
R84
R2
CONTROL
R3
U5
C25
BOARD
PB1 PB2 PB3
D12
OPEN CLOSE STOP
Single 3 Button Station
MOTOR
CONTROL
BOARD
TURNING ON THE POWER TO THE OPERATOR
NOTE: It is now necessary to turn on the power in order to to change the Operating
Mode (if applicable), program any changes desired to the operator's other settings, check
for proper operation, and finalize any adjustments to include the limit settings. Before
doing so, ensure that all mounting hardware are installed and properly tightened, that all
electrical connections are per local code requirements, and that proper wiring practices have
been followed. Also, double-check that all ropes have been removed from the door and
that the doorway is clear.
Figure 10
R93
D1
R4
R8
C21
R24
TB1
EXTERNAL INTERLOCK
D3
R65
C10
D2
MOTOR
CONTROL
R38
BOARD
R87
R94
R95
R2
R3
C25
PB1 PB2 PB3
OPEN CLOSE STOP
Multiple 3 Button Station
U5
Single Button and External Interlock Wiring
Note: When adding an External Interlock
remove the factory installed jumper from
the connection terminals.
R5
R57
R25
RADIO
C24
24V
D8
COM
RM3
RM2
RM1
VCC
P7
R54
R55
R56
D12
Figure 11
Figure 12
12