Allstar MH5011S Installation And Owner's Manual page 11

11
DOOR EDGE INSTALLATION & WIRING
Figure 8
OPEN CLOSE STOP
TB1
MOTOR
CONTROL
Figure 9
BOARD
Door Edge and Photoelectric Wiring
See text on page 10 for operation when Safe-Finish™ or Access
Alliance Safe-Finish II™ photo-beams are connected.
Note: When adding a
SAFE FINISH PHOTOBEAM
photocell device with a
Normally Closed output
remove the factory installed
jumper from the connection
terminals.
3-WIRE PHOTOBEAM