1. Manuals
  2. Brands
  3. Alloy Manuals
  4. Media Converter
  5. POE120 Series
  6. Product manual

Alloy POE120 Series Product Manual

10/100 base-tx to 100base-fx converter poe powered device
Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
POE120 Series
10/100 Base-TX to 100Base-FX Converter
POE Powered Device
Version 1.01
Date: 13 July 2005

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the POE120 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Alloy POE120 Series

Summary of Contents for Alloy POE120 Series

  • Page 1 POE120 Series 10/100 Base-TX to 100Base-FX Converter POE Powered Device Version 1.01 Date: 13 July 2005...

  • Page 2: Model Description

    If the Copper or Fibre link fails, the converter forces the link status of the connecting device to also fail. The POE120 Series media converters are fully compliant to the IEEE 802.3af standard. The converters advanced auto-sensing algorithm allows the unit to draw power from any IEEE 802.3af Power Sourcing Equipment (PSE) device...

  • Page 3: Installing The Converter

    The Copper port supports Auto MDI-X, therefore there is no need to use a cross-over cable when connecting to a switch. Fibre Default: 100FDX Port ”100FDX”/”100HXD” setting, see figure 11. S1-Bit 5 Fig. 1 View of the POE120 Series Media Converter...
  • Page 4 100FX Fibre Network PoE PSE or PoE Injector Fig. 3 POE120 Series to PSE Device or POE Injector POE1 20 Series 10/ 100 Base- TX to 100Base- FX Fig. 4 POE120 Series Media Converter Front Panel Fig. 5 POE120 Series Media Converter Rear Panel...
  • Page 5 Endpoint: -48V via TP pins 1, 2, 3, 6 Midspan: - 48V via pins 4, 5, 7, 8 5. WDM Single Fibre Model The POE120 Series media converter has an optional Wavelength Division Multiplexing (WDM) Model that can transport bi-directional full duplex signals over a single fibre simultaneously.
  • Page 6 6. Link Failure Propagation The POE120 Series media converters support Link Failure Propagation (LFP). If the Copper port is unplugged, the converter stops transmission on the fibre port. This causes the remote fibre node link to fail as well. The LED’s on the converter will now show link failure on both the copper and fibre ports.

  • Page 7: Led Description

    7. LED Description The following table describes the LED’s located on the POE100 Series media converter. Colour FX LNK/ACT Green Amber FDX/COL TP LNK/ACT Green TP 100 Green Green Green 8. DC Jack and AC-DC Power Converter The DC jacks central post is 2.5mm wide. DC Jack DC Input Fig.

  • Page 8: Dip Switch Configuration

    9. DIP Switch Configuration Fig. 11 Reset button and S1 – Bit 1, 2, 3, 4, 5, 6, Configuration and Settings Reset S1-1 TP Port Mode S1-2 TP Port Speed S1-3 TP Port Duplex S1-4 LFP S1-5 Fibre Port Duplex S1-6 POE ON/OFF Note: 1.

  • Page 9: 11. Technical Specifications

    11. Technical Specifications Standards: UTP Cable: Fibre Cable: Power Reception Support: LED Indicators: Data Transfer Rate: Flow Control: Power Requirements: Ambient Temperature: 0º to 50º C Humidity: Dimensions: Complies with C-Tick, FCC Part 15 Class A and CE Mark IEEE 802.3u 10/100Base-TX, 100Base-FX IEEE 802.3af Power Over Ethernet Cat.

Table of Contents

Save PDF