Ieee 802.1X Authentication Configuration Guidelines; Ieee 802.1X Authentication - Cisco 3750G - Catalyst Integrated Wireless LAN Controller Configuration Manual

Chapter 10 Configuring IEEE 802.1x Port-Based Authentication
Table 10-2
Feature
Re-authentication number
Quiet period
Retransmission time
Maximum retransmission number
Client timeout period
Authentication server timeout period
Inactivity timeout
Guest VLAN
Inaccessible authentication bypass
Restricted VLAN
Authenticator (switch) mode
MAC authentication bypass

IEEE 802.1x Authentication Configuration Guidelines

These section has configuration guidelines for these features:
•
•
•

IEEE 802.1x Authentication

These are the IEEE 802.1x authentication configuration guidelines:
•
•
OL-8550-02
Default IEEE 802.1x Authentication Configuration (continued)
IEEE 802.1x Authentication, page 10-23
VLAN Assignment, Guest VLAN, Restricted VLAN, and Inaccessible Authentication Bypass, page
10-24
MAC Authentication Bypass, page 10-25
When IEEE 802.1x authentication is enabled, ports are authenticated before any other Layer 2 or
Layer 3 features are enabled.
If you try to change the mode of an IEEE 802.1x-enabled port (for example, from access to trunk),
an error message appears, and the port mode is not changed.
Configuring IEEE 802.1x Authentication
Default Setting
2 times (number of times that the switch restarts the
authentication process before the port changes to the
unauthorized state).
60 seconds (number of seconds that the switch remains in
the quiet state following a failed authentication exchange
with the client).
30 seconds (number of seconds that the switch should
wait for a response to an EAP request/identity frame
from the client before resending the request).
2 times (number of times that the switch will send an
EAP-request/identity frame before restarting the
authentication process).
30 seconds (when relaying a request from the
authentication server to the client, the amount of time the
switch waits for a response before resending the request
to the client.)
30 seconds (when relaying a response from the client to
the authentication server, the amount of time the switch
waits for a reply before resending the response to the
server. This setting is not configurable.)
Disabled.
None specified.
Disabled.
None specified.
None specified.
Disabled.
Catalyst 3750 Switch Software Configuration Guide
10-23