Displaying Ipv6 - Cisco 3750G - Catalyst Integrated Wireless LAN Controller Configuration Manual

Displaying IPv6

To disable an OSPF routing process, use the no ipv6 router ospf process-id global configuration
command. To disable the OSPF routing process for an interface, use the no ipv6 ospf process-id area
area-id interface configuration command.
For more information about configuring OSPF routing for IPv6, see the "Implementing OSPF for IPv6"
chapter in the Cisco IOS IPv6 Configuration Library at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ipv6_vgf.htm
Displaying IPv6
Table 36-3
Table 36-3 Commands for Monitoring IPv6
Command
show ipv6 access-list
show ipv6 cef
show ipv6 interface interface-id
show ipv6 mtu
show ipv6 neighbors
show ipv6 ospf
show ipv6 prefix-list
show ipv6 protocols
show ipv6 rip
show ipv6 route
show ipv6 routers
show ipv6 static
show ipv6 traffic
This is an example of the output from the show ipv6 interface privileged EXEC command:
Switch# show ipv6 interface
Vlan1 is up, line protocol is up
IPv6 is enabled, link-local address is FE80::20B:46FF:FE2F:D940
Global unicast address(es):
Joined group address(es):
MTU is 1500 bytes
ICMP error messages limited to one every 100 milliseconds
ICMP redirects are enabled
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND advertised reachable time is 0 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND router advertisements are sent every 200 seconds
ND router advertisements live for 1800 seconds
<output truncated>
Catalyst 3750 Switch Software Configuration Guide
36-22
shows the privileged EXEC commands for monitoring IPv6 on the switch.
Purpose
Display a summary of access lists.
Display Cisco Express Forwarding for IPv6.
Display IPv6 interface status and configuration.
Display IPv6 MTU per destination cache.
Display IPv6 neighbor cache entries.
Display IPv6 OSPF information.
Display a list of IPv6 prefix lists.
Display IPv6 routing protocols on the switch.
Display IPv6 RIP routing protocol status.
Display the IPv6 route table entries.
Display the local IPv6 routers.
Display IPv6 static routes.
Display IPv6 traffic statistics.
3FFE:C000:0:1:20B:46FF:FE2F:D940, subnet is 3FFE:C000:0:1::/64 [EUI]
FF02::1
FF02::2
FF02::1:FF2F:D940
Chapter 36 Configuring IPv6 Unicast Routing
OL-8550-02