Location Of Fuses; Error Codes - Acroprint ATR120 User Manual

Location of fuses

The fuse panel is located on the back of the ATR120 in the lower left corner. To
access fuses, disconnect the power from the clock and remove the screw securing
door. Replace blown fuse with only the same rated fuse. Do not substitute.

Error Codes

The ATR120 has built-in diagnostics to guide you in maintaining your time clock.
These Error Codes, when occurring, will be seen on the display.
Code Meaning of Error
E-01 Clock motor or sensor failure
E-03 Card positioning
E-05 Card does not feed correctly
E-30 Printer head fails to return to home
position
E-33 Can't change color
E-35 The card can't be returned
E-37 Sensor cannot locate card
E-38 Printer head jammed
E-40 Wrong password entered
1. Printer Head Fuse (1.5A DC 12V)
2. AC Fuse (1A AC 240V)
3. DC Fuse (2A DC 12V)
Check
Unplug and reconnect power cord
or turn the program switch on-off
twice, letting the clock readjust.
Contact dealer or factory
Re-insert card and print.
Contact dealer or factory
Check that the ribbon is installed
correctly.
Contact dealer or factory
Make sure there are no
obstructions in card receiver
Contact dealer or factory
Contact dealer or factory
Contact dealer or factory
Enter the correct password
21