Acroprint ATR120 User Manual page 15

Event Print in
Max 32
1
2
3
4
5
6
7
8
Event Time
1 8:00
2 8:01
3 12:00
4 13:00
5 13:01
6 17:00
7 17:30
8 07:30
When the display shows 01 5:00
Press button two to select the event ( IN1 , print in red or OUT1 , print in black, etc.)
Press button three to confirm the event ( OUT3 will continue to flash).
Press button four to select the hour of the event.
Press button five to select the minute the event will occur.
To have the event occur each day (Recommended), press button six to save the
event and advance to the next scheduled event, 02 5:00 .
If you do not want an event to occur each day, you may select the day(s) of the week
you want the event to occur. After selecting the minute the event will occur, press
button two. At the bottom of the display, the event indicator will be displayed and
OUT 3 will be flashing. As the top of the display, SUN will be flashing. To select
SUN, press button three or to advance to MON, press button two. Remember to use
button three to save the day of the week. Cycle between buttons two and three as
Print in
Red Black
IN1 OUT1
08:01
13:01
17:30
07:30
Description of Event
SIGNAL Only to denote start of work schedule
Color changes to RED to denote late or early lunch punches
SIGNAL noting start of lunch period and color change to
BLACK SIGNAL
SIGNAL Only to denote end of lunch period
Color change to RED to show late in punches or early end of
day out punches
SIGNAL to denote end of work schedule and color change to
BLACK
Color change to RED to indicate possible overtime
Color change to BLACK to allow morning in punches
Signal Print Red &
Only Signal
IN2 IN1 IN2
08:00
13:00
11
Print Black
& Signal
OUT1 IN2
12:00
17:00