Acroprint ATR120 User Manual page 24

Next, remove and discard the pin and
clip. Remove the ribbon cassette by
first sliding it left and then upwards as
shown by the illustration (A & B).
Place the new ribbon into the ATR120.
It is not necessary to replace the pin and
clip. Turn the ribbon feed knob
counterclockwise until the ribbon is taut.
Close the front cover.
IX. Troubleshooting
Problem
Clock does not accept
time cards
Printing light
Printing in wrong
position
Not printing
Clock stopped
Analog clock slow or
stopped
Possible Cause
AC power is OFF
Power cord is disconnected
AC fuse blown
DC fuse blown
Still in program mode
Worn ribbon
Ribbon cassette not seated
correctly
Incorrect pay period starting
day
Time card inserted
incorrectly
Printing head fuse blown
Ribbon cassette not seated
correctly
AC power is off
Power cord is disconnected
AC fuse blown
Battery weak
Out of synchronization
20
Check
Restore power
Restore cord to outlet
Replace AC240V 1A fuse
Replace DC 12V 2A fuse
Return switch to NOR
position
Replace ribbon cassette
Reinstall ribbon cassette
Set correct day
Insert card correctly
Replace DC 12V 1.5 Amp
fuse
Reinstall ribbon cassette
Restore power
Restore cord to outlet
Replace AC240V 1A fuse
Replace AA battery
Reset to digital display