Bosch VJT-X10S Installation And Operating Manual page 68

68 en | Configuration Using a Web Browser
1.
2.
3.
4.
5.
6.
Holidays
You can define holidays on which a profile should be active that are different to the standard
weekly schedule. This allows you to apply a schedule for Sundays to other days with dates
that fall on varying weekdays.
1.
2.
3.
4.
5.
Deleting Holidays
You can delete holidays you have defined yourself at any time.
1.
2.
3.
4.
DOC | V4.0 | 2009.06
Click the profile you want to link in the Time periods field.
Click in a field in the table, hold down the mouse button and drag the cursor over all the
periods to be assigned to the selected profile.
Use the right mouse button to deselect any of the intervals.
Click the Select All button to link all time intervals to the selected profile.
Click the Clear All button to deselect all of the intervals.
When you are finished, click the Set button to save the settings in the unit.
Click the Holidays tab. Any days that have already been selected will be shown in the
table.
Click the Add button. A new window will open.
Select the desired date from the calendar. You can select several consecutive calendar
days by holding down the mouse button. These will later be displayed as a single entry in
the table.
Click OK to accept the selection. The window will close.
Assign the individual holidays to the VCA profiles, as described above.
Click the Delete button. A new window will open.
Click the date you wish to delete.
Click OK. The item will be deleted from the table and the window will close.
The process must be repeated for deleting additional days.
Installation and Operating Manual
VideoJet X10
Bosch Security Systems