Bosch VJT-X10S Installation And Operating Manual page 52

52 en | Configuration Using a Web Browser
CF cards (see Section CF Slot, page 21) are the ideal solution for shorter storage times and
temporary recordings, for example alarm recordings or local buffering in the event of network
interruptions.
If the VideoJet X10 has a hard drive, this is suitable for longer, local recordings in mobile use.
For long-term, authoritative images in stationary operation, it is essential that you use an
appropriately sized iSCSI system.
It is also possible to let the VRM Video Recording Manager control all recording when
accessing an iSCSI system. This is an external program for configuring recording tasks for
video servers. For further information please contact your local customer service at Bosch
Security Systems.
Device manager
If you activate the VRM option in this screen, the VRM Video Recording Manager will manage
all recording and you will not be able to configure any further settings here.
CAUTION!
!
Activating or deactivating VRM causes the current settings to be lost; they can only be
restored through reconfiguration.
Recording media
Select the required recording media here so that you can then activate them and configure
the recording parameters.
iSCSI Media
If you want to use an iSCSI system as a recording medium, you must set up a connection to
the required iSCSI system and set the configuration parameters.
NOTICE!
i
The iSCSI storage system selected must be available on the network and completely set up.
Amongst other things, it must have an IP address and be divided into logical drives (LUN).
1.
2.
3.
Local Media
The supported local recording media are displayed in the Storage overview field.
Activating and Configuring Storage Media
The storage overview displays the available storage media. You can select individual media or
iSCSI drives and transfer these to the Managed storage media list. You can activate the
storage media in this list and configure them for storage.
CAUTION!
Each storage medium can only be associated with one user. If a storage medium is already
!
being used by another user, you can decouple the user and connect the drive with the
VideoJet X10. Before decoupling, make absolutely sure that the previous user no longer needs
the storage medium.
1.
DOC | V4.0 | 2009.06
Enter the IP address of the required iSCSI destination in the iSCSI IP address field.
If the iSCSI destination is password protected, enter this into the Password field.
Click the Read button. The connection to the IP address will be established. In the
Storage overview field, you can see the corresponding logical drives.
If the local recording medium is password protected, enter this into the Password field.
In the Recording media section, click the iSCSI Media and Local Media tabs to display
the applicable storage media in the overview.
Installation and Operating Manual
VideoJet X10
Bosch Security Systems