Connections On The Rear Panel - Bosch VJT-X10S Installation And Operating Manual

VideoJet X10
3.5

Connections on the Rear Panel

7
8
9
10
11
12
13
14
15
16
NOTICE!
i
For more information about the LEDs, see Section 8.4 LEDs, page 107.
For terminal block assignment, see Section 8.8 Terminal Block, page 109.
Bosch Security Systems
ETH 1 RJ45 socket
for connecting to an Ethernet LAN (local network), 10/100 MBit Base-T
ETH 1 LED
lights up yellow when the unit is connected to the network via ETH 1
ETH 2 RJ45 socket
for a redundant connection to the network or to an iSCSI system
ETH 2 LED
lights up yellow when the unit is connected to the network via ETH 2
Terminal block
for alarm inputs, relay outputs, serial interface and power supply
Power On LED
lights up green when ready for operation
Factory reset button
to restore factory default settings
Compact Flash slot
for a CF card type I or type II
SFP LED
lights up yellow when the unit is connected via SFP
SFP slot
for mini-GBIC module
Installation and Operating Manual
Product Description | en 17
DOC | V4.0 | 2009.06