Changing Printer Properties - Neoware e140 - Thin Client User Manual

Changing printer
properties
7
Name Your Printer. If you selected from the pre-defined list of
RDP printers, a default Printer Name will appear. Only change
this name if instructed to do so by your System Administrator.
8
Set default printer. If only a single RDP printer is defined, it
will automatically be configured as the default printer. The
default printer will receive all RDP print jobs, unless you specify
a different printer. If you define more than one RDP printer, use
this screen and answer "No" for all printers except the one that is
to be the default.
Configure another printer? If you need to add another RDP
printer, attached to the thin client appliance on a different port, click
Yes to repeat the steps described above. Click No if you are not con-
figuring any additional RDP printers. Then click Finish to complete
the process. Each RDP printer should appear on the Printers tab with
its defined name.
Once a printer is defined, you can change printer properties by either
highlighting the printer icon and clicking Properties, or by right-
Changing Appliance Properties
RDP Printers icon 109