Changing Appliance Properties
Connections tab
ezConnect tab
122
Connection Manager icon
Allow connections to be created or modified -- When checked,
•
this feature prevents appliance users from adding, changing, or
deleting connections defined through the Connection Manager.
Check this box to allow access to the Configure tab in Connec-
tion Manager. Uncheck this box to hide the Configure tab.
Checking this box and setting a thin client appliance password
effectively locks down the desktop device so that end users may
not make any changes and may not view configuration screens
unless they have access to the password.
Autostart all connections -- This checkbox, if checked, causes
•
all of the defined connections (in Connection Manager) to be
started whenever the thin client appliance starts. If you desire to
have fewer than all of the connections autostart, set the individual
connections to autostart. (see "Connection Startup" on page 41.)
Automatically restart disconnected sessions -- This checkbox,
•
if checked, causes any disconnected connection to automatically
reconnect. Used in conjunction with autostarted connections, a
thin client appliance can be configured to always be connected to
one or more servers.
Enable French Terminal Server connections -- This checkbox,
•
if checked, enables RDP connections to the French version of
Windows NT Server, Terminal Server Edition. This checkbox
does not effect ICA connections.
Enable Single button view -- Select this checkbox to display a
•
Single Button Connection Manager in place of the default
Neoware Connection Manager. When enabled, the ezConnect