Network And Dialup Connections Icon - Neoware e140 - Thin Client User Manual

Network and Dialup Connections icon

popup dialog box. This will reset the graphics and a test pat-
tern will appear on your monitor.
4
Once the test is complete, a final popup dialog box will ask if
you saw the image properly.
5
Choose Yes, if the pattern appeared normal.
6
If you did not see the pattern and you select No, a popup dia-
log box will inform you that the screen was not visible due to
limitations of your video card or monitor.
NOTE: If the user wants to change the Display resolution to
the default during device boot, they can hit F5 while the green
bar is sliding across the screen. Portions of the bar will turn
purple to indicate that the Display change has been received,
and the device will boot into the default resolution 800x600.
You can access Ethernet Adapter settings by double clicking on the
Network and Dial-up Connections icon on the Control Panel.
Changing Appliance Properties
Network and Dialup Connections icon 97