Switching Audio Input; Using The Built-In Microphone; Using An External Microphone And Audio Equipment - Panasonic AG-AF100A Operating Instructions Manual

Memory card portable-recorder
Hide thumbs Also See for AG-AF100A:
Table of Contents

Advertisement

Switching Audio Input

During shooting, you can record up to two
channels of sound. You can also switch the input
sound to be recorded on each of the channels to
the built-in microphones, external microphones or
audio equipment connected to camera.
CH1 SELECT switch
CH2 SELECT switch
BARS
ZEBRA
OIS
EVF DTL
CH1 SEL
CH2 SEL
INT(L)
INPUT1
INPUT1
INPUT2
INPUT2
WFM
AUDIO
INPUT1
INPUT2
ON
ON
OFF
OFF
COUNTER-RESET/TC SET
MIC POWER +48V
. .
FOCUS
POWER
INPUT 1 switch
INPUT 1 terminal
INPUT 1/2
(MIC POWER +48V)
switches
INPUT 2 switch
INPUT 2 terminal

Using the built-in microphone

1
Switch the CH1 SELECT switch to INT (L).
Audio from the built-in microphone Lch is
recorded to audio channel 1.
2
Switch the CH2 SELECT switch to INT (R).
Audio from the built-in microphone Rch is
recorded to audio channel 2.
Using an external microphone and
audio equipment
1
Connect an external microphone or audio
equipment to the INPUT 1/2 (XLR 3-pin)
terminals. (Page 41)
2
Use the INPUT 1/2 switches to switch the
audio input.
LINE: (audio equipment is connected)
Input level is 0 dBu.
MIC: (an external microphone is connected)
Input level is -50 dBu.
You can change the input level to -60 dBu
in the setup menus, RECORDING SETUP
screen MIC GAIN1 and MIC GAIN2. (Page 56)
Be aware that sensitivity will be higher if
you choose -60 dBu so you will record more
noise.
3
When using the phantom microphone
(which requires + 48V power supply),
set the INPUT 1/2 (MIC POWER +48V)
switches to ON.
ON: (When using the phantom microphone)
+48V power supply to INPUT 1/2 terminals.
OFF: (When a phantom microphone is not
connected)
No power supply for INPUT 1/2 terminals.
The battery will discharge faster if you use a
phantom microphone.
Set to OFF if you connect equipment not
compatible with +48V. You can damage such
equipment if you leave the setting at ON.
When using the AG-MC200G (optional), set
the MIC GAIN item to -50 dBu.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avccam ag-af100pAvccam ag-af100a

Table of Contents