Using The Lcd; Emphasizing Outlines - Panasonic AG-AF100A Operating Instructions Manual

Viewfinder (continued)

Using the LCD

1
Set the POWER switch to ON.
(Page 27)
2
Open the LCD monitor.
• The monitor opens to an angle of 90
degrees. The camera may be damaged by
attempting to open it further than this.
3
Position the LCD monitor where it is easiest
to see.
• The monitor can be rotated 180° toward the
lens and 90° toward you.
• Do not apply unnecessary force to the
open LCD. This can damage the camera.
• Ensure the LCD is fully closed.
• Operation status displays during self-portrait
recording
No display: Cannot record (no card, etc.)
: Recording in progress, during transition
to the recording pause mode
: Recording paused (recording standby)
: Warning display
30

Emphasizing outlines

Emphasizing the outlines of the images you see
in the viewfinder or on the LCD makes it easier to
focus.
Emphasizing the outlines does not effect the
images you shoot.
1
In CAM mode, press EVF DTL button.
"EVF DTL ON" appears on the screen for about
2 seconds.
MEGA
O.I.S.
ON
OFF
FOCUS
Press EVF DTL button again to return to the
original display. "EVF DTL OFF" appears on the
screen for about 2 seconds.
MENU EXEC
START/
PUSH-ENTER
STOP 2
– +
AUDIO MON
BARS ZEBRA OIS
EVF DTL CH1 SEL CH2 SEL
INT(L) INPUT1
INPUT1 INPUT2
INPUT2
WFM
AUDIO
INPUT1 INPUT2
ON ON
OFF OFF
COUNTER-RESET/TC SET
MIC POWER +48V
FOCUS DISP/ POWER . .
FUNCTION
USER 1 MODE CHK OFF ON MODE
CAM
A
M
PB
CH1 AUDIO LEVEL
CH2
IRIS GAIN WHITE BAL USER 2
L
B
M A
H PRST
EVF DTL button
BARS ZEBRA OIS
EVF DTL CH1 SEL CH2 SEL
INT(L) INPUT1
INPUT1 INPUT2
INPUT2
WFM
AUDIO
INPUT1 INPUT2
ON ON
OFF OFF
COUNTER-RESET/TC SET
MIC POWER +48V
POWER . .